Nagrywarka Toshiba.pdf

(139 KB) Pobierz
TOSHIBA
STORAGE DEVICE DIVISION
SD-R2002
CD-RW/DVD ROM DRIVE
PRODUCT SPECIFICATION
October 2000
REV. 1.0
Specifications are subject to change without notice
DOCUMENT NUMBER
14508
Warnings:
This equipment (an optical disc drive) handled under the conditions out of equipment specifications
may cause heavy load, heat generation, malfunction, erroneous operation and performance degradation.
Therefore, please handle this equipment properly in compliance with the warnings provided below. In the
event that you do not comply with the warnings, Toshiba cannot guarantee the safety, reliability and
performance of the equipment expressly provided in the specification. Manufacturers and resellers
of the computer system using this equipment and/or this equipment itself shall notify the end-users of
the warnings provided herein and ensure them to comply with these warnings in an appropriate manner.
1. This equipment does not involve any over-current protection circuit. Use an appropriate over-current
protection in the computer system which this equipment would be connected. Toshiba shall not be
liable for any damages to the system which does not have any over-current protection.
2.
DO NOT
disassemble or modify this equipment. Toshiba shall not make any guarantee to the reliability,
safety and performance of this equipment expressly provided in the specification and nor be liable fo
r any damages resulting from such unauthorized disassembly or modification.
3. Read carefully and comply with this Product Specification in order to avoid the risk of data error in writing
operation. Such possible data error would be made by any factors other than this equipment (i.e., poor
storage media, misuse of this equipment, malfunction in a computer system connecting this equipment,
etc.). Toshiba shall not be liable for any damages resulting from such data loss. Check whether the
original data is correctly copied or stored upon completion of writing operation.
Take any necessary measures to protect your data such as system backup and/or mirroring disk
subsystems in order to avoid the risk of unexpected data loss or data corruption resulting from failure
in this equipment for some reasons.
Manufacturers and resellers of the computer system using this equipment shall be required to consider
the safety of such computer system and data integrity in order to avoid the risk of any consequential
damages caused by data loss or data corruption and any problems or accident caused by malfunction
of the computer system.
DO NOT
use this equipment in the system such as medical equipment which may cause personal injury
or property damages resulting from malfunction of this equipment and unexpected data corruption or
data error in reading operation.
4. Turn off the power for this equipment and wait more than one (1) minute before you eject the disc using
the emergency eject mechanism when a disc cannot be ejected for some reasons in order to avoid the
risk of damages to the disc.
Notice
1. Turn off the system power before mounting/removing this equipment in order to avoid the risk of
damages to this equipment.
2. Insert the DC power plug in correct direction in order to avoid the risk of damages to this equipment.
3. Handle this equipment only in electrostatically safe environment and
do not
touch connecting terminals
with empty hands when you build in or pull out this equipment from other product in order to avoid the
risk of malfunction of this equipment.
SD-R2002 Rev.1.0
4.DO
NOT
do any of the following:
4.1.
DO NOT
use storage media (CD's / DVD's) that are not the correct size or shape, or do not meet the
minimum formatting requirements set forth in section 3.1.(1) of this Product Specification.
4.2.
DO NOT
insert more than one (1) CD or DVD disc into the drive at any time. Doing so will damage or
destroy this equipment and could damage or destroy the disc or cause data loss or corruption.
4.3.
DO NOT
load or eject any CD or DVD disc with force. Doing so will damage or destroy this equipment
and could damage or destroy the disc or cause data loss or destruction.
4.4.
DO NOT
give a strong shock while load or eject operation is in process. Doing so will damage or
destroy this equipment and could damage or destroy the disc or cause data loss or corruption.
4.5.
DO NOT
eject a CD or DVD disc while the drive is in operation. Doing so will damage or destroy this
equipment and could damage or destroy the disc or cause data loss or corruption.
4.6.
DO NOT
insert anything else into the drive other than a CD or DVD disc. Doing so will damage or
destroy this equipment.
-----
To OEM Customers:
-----------------------------------------------------------------
Please notify below notice to your customers.
Notice
Copyrighted works including, but not limited to music, video, computer program, database are
protected by copyright laws. Unless specifically permitted under applicable copyright laws,
you cannot copy, modify, assign, transmit or otherwise dispose of any copyrighted work
without the consent of the owner of the copyright.
Please take notice that unauthorized copying, modification, assignment, transmission and
other disposition may be subject to claims for damages and to penalties.
SD-R2002 Rev.1.0
Contents
1. Introduction ---------------------------------------------------------------------------------------------------------------------- 1
2. Features -------------------------------------------------------------------------------------------------------------------------- 1
3. Specifications ------------------------------------------------------------------------------------------------------------------ 3
3.1. Performance ------------------------------------------------------------------------------------------------------------ 3
3.2. Environmental Conditions ---------------------------------------------------------------------------------------- 5
3.2.1. Temperature and Humidity ---------------------------------------------------------------------------------- 5
3.2.2. Dust and Dirt ------------------------------------------------------------------------------------------------------ 5
3.2.3. Vibration ----------------------------------------------------------------------------------------------------------- 6
3.2.4. Atmospheric Pressure and Altitude -------------------------------------------------------------------- 6
3.2.5. Shock --------------------------------------------------------------------------------------------------------------- 6
3.3. Installation Conditions --------------------------------------------------------------------------------------------- 7
3.3.1. Equipment -------------------------------------------------------------------------------------------------------- 7
3.3.2. Installation --------------------------------------------------------------------------------------------------------- 7
3.4. Dimensions and Mass --------------------------------------------------------------------------------------------- 9
3.5. Reliabilities ------------------------------------------------------------------------------------------------------------- 9
3.5.1. Error Rate ---------------------------------------------------------------------------------------------------------- 9
3.5.2. MTBF ---------------------------------------------------------------------------------------------------------------- 9
3.5.3. MTTR ---------------------------------------------------------------------------------------------------------------- 9
3.5.4. Drive Life ----------------------------------------------------------------------------------------------------------- 9
4. Configurations -----------------------------------------------------------------------------------------------------------------10
4.1. Electrical Circuits ------------------------------------------------------------------------------------------------------10
4.2. Optical Pickup ---------------------------------------------------------------------------------------------------------10
4.3. Spindle Motor ----------------------------------------------------------------------------------------------------------10
4.4. Feed Motor --------------------------------------------------------------------------------------------------------------10
5. Functions ------------------------------------------------------------------------------------------------------------------------12
5.1. Disc Data Configurations ------------------------------------------------------------------------------------------12
5.1. 1. DVD-ROM Data Configurations ---------------------------------------------------------------------------12
5.1. 2.CD-ROM Data Configurations ------------------------------------------------------------------------------12
5.1. 3.CD-R/CD-RW Data Configurations -----------------------------------------------------------------------13
5.2. Power ON/OFF Timing --------------------------------------------------------------------------------------------14
6. Interfaces ------------------------------------------------------------------------------------------------------------------------14
6.1. I/O Cable ------------------------------------------------------------------------------------------------------------------14
6.2. Signal Summary -------------------------------------------------------------------------------------------------------15
6.2.1. Signal Specifications ----------------------------------------------------------------------------------------15
6.2.2. Timing of Host Interface (PIO) ----------------------------------------------------------------------------16
6.2.3. Timing of Host Interface (DMA Multi) -------------------------------------------------------------------17
6.2.4.Timing of Host Interface(Ultra DMA) ---------------------------------------------------------------------18
6.3. Connector -------------------------------------------------------------------------------------------------------------19
6.4. Support Command List --------------------------------------------------------------------------------------------19
7. Power Requirements -----------------------------------------------------------------------------------------------------21
7.1. Source Voltage ------------------------------------------------------------------------------------------------------21
7.1.1. Spike --------------------------------------------------------------------------------------------------------------21
7.1.2. Ripple
-----------------------------------------------------------------------------------------------------------21
SD-R2002 Rev.1.0
7.2. Current Drain
-------------------------------------------------------------------------------------------------------21
7.2.1.Sleep
------------------------------------------------------------------------------------------------------------21
7.2.2. Standby ----------------------------------------------------------------------------------------------------------21
7.2.3. Continuous Read -------------------------------------------------------------------------------------------21
7.2.4. Idle ------------------------------------------------------------------------------------------------------------------21
7.2.5. Average ------------------------------------------------------------------------------------------------------------21
7.2.6. Maximum ----------------------------------------------------------------------------------------------------------21
7.2.7. Peak in executing Access ----------------------------------------------------------------------------------21
7.2.8. Write ----------------------------------------------------------------------------------------------------------------21
8. CD Audio
------------------------------------------------------------------------------------------------------------------- 22
8.1. Analog Out -----------------------------------------------------------------------------------------------------------22
8.2. Audio Modes ------------------------------------------------------------------------------------------------------- 22
9. Device Configuration Jumper ---------------------------------------------------------------------------------------- 22
9.1 Master Mode Setting ---------------------------------------------------------------------------------------------- 22
9.2 Slave Mode Setting ------------------------------------------------------------------------------------------------ 22
10.Busy Indicator
------------------------------------------------------------------------------------------------------------- 23
-------------------------------------------------------------------------------------------------- 24
--------------------------------------------------------------------------- 24
11. Emergency Release
12. Safety Standards/Agency Approvals
13. Electrostatic Discharge
14. Accessories
15. Packaging
---------------------------------------------------------------------------------------------- 24
-------------------------------------------------------------------------------------------------------------- 24
----------------------------------------------------------------------------------------------------------------- 25
-------------------------------------------------------------------------------------- 25
16. CE Declaration of conformity
SD-R2002 Rev.1.0

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin