Method one: 1. Press gas pedal to the floor 2. Ingnition on,to second, do not start the engine 3. Release the gas pedal 4. Wait minimum 20 seconds, do NOT touch the brake pedal, do NOT turn off ingnition 5. Turn ingnition off. Method two: 1. Turn the key to the on (not start) position, the position just before the starter turns over. 2. Press the gas pedal to the floor with ignition in the "on" position. 3. Hold the pedal to the floor for five seconds, then turn the ignition off. Then first AFTER turning ignition off, release the gas pedal. 4. Wait a full 2 minutes for a full electronic alignment. Dont touch any pedals. Don't remove the key. 5. Conditions: Motor off Battery over 10,1 volt Coolant temp between 10?C and 90?C Outside air temp higher than 6?C
kudys11