IPC Fast Operation User Manual
Directory
1. Interface introduction 4
1.1 Box IP Camera(IPC-XXXX-E series) interface 4
1.2 Waterproof(B cable) interface 5
1.3 Waterproof(P cable) Interface 5
1.4 Robot IP camera Interface 6
1.5 Cube IP Camera Interface 6
1.6 Interface Function Instruction 7
2. Network Operation 9
2.1 IE Operation 9
2.2 Client Software Operation 12
2.3 Monitor the device by WAN(cloud server) 14
2.4 HVR user manual 19
3. POE Power supply 22
4. Mobile monitor 24
5. Common Questions 40
Features:
1. Reliability and compatibility
2. Advanced H.264 High profile compression
3. Low streams and high resolution image
4. Support local BNC output
5. Support several servers, IP address,DDNS,cloud
6. Support two-way audio
7. Support dual stream,cloud technology.
8. Support iPhone,Windows Mobile,BlackBerry,Symbian, Android remote monitor.
9. Support all kinds of browsers, IE, Chrome,Firefox and Safari
10. Support WIFI/3G
11. Support connect to HVR/NVR
12. Support ONVIF2.0,please refer to IP camera user manual in the CD
Picture 1.1 HD Box IP camera
Picture 1.2 IR Waterproof IP Camera
Picture1.3 IR Waterproof IP Camera
Picture 1.4 Robot IP camera
Picture 1.5 Cube IP Camera
DC12/5V Power Supply:12/5V DC power supply,wrong power supply will make the device broken
Indication Light: It's working status of device, when power on is red, finish startup is green, local record is green flicker, alarm activated is red flicker
Alarm Input: Default - Normal open
Alarm Output: Use for alarm activated
RS485: Connected with PTZ or other RS485 devices
RESET: Keep pressing 5seconds to restore to factory setting,include IP setting
Audio Input: Connected to audio picker
Audio Output: Connect to Speaker
Video Output: Connect to TV for debugging focal length
Antenna: Use for WIFI/3G
2.1.1 Use correct power supply
2.1.2 After startup, connect the device with switch or router, see below picture
Router / Switch / USB hub
IPC
Picture2.1 Network structure
2.1.3 Make sure the device ip address is in the same LAN of router, default IP address is 192.168.1.10
2.1.4 Go to CD->English->Software to find UpgradeTool and install it
2.1.5 Run UpgradeTool, Clock "IP Search",you will find the device ip,see below picture
Picture2.2 IP Configure
2.1.6 Select the device to config IP, see below picture
Picture2.3 IP Configure
2.1.7 Factory default IP setting:
IP address: 192.168.1.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: admin
Password: no password
Picture 2.4 Local BNC output
Note: Local BNC output is for debugging lens and look over IP settings(only keep 30seconds ,then disappear), see above picture
2.1.8 Open IE,type IP address,login with user name and password,see below picture
Picture 2.5 WEB GUI After login,enter into below picture
Picture2.6 WEB GUI after login
2.2 Client Software Operation
2.2.1 Go to CD->English->Software, find CMS
2.2.2 Install CMS, run it, default user name: super, no password
Picture 2.7 CMS Interface
2.2.3 Device manage: System->Device manage,see below picture
Picture2.8 Device manage
2.2.4 Add Device, see below picture
Picture 2.9 Add device
add device modes: IP address, domain name,serial number and MAC address.
Add IP address ---- IP search and manually add IP address
IP search: Click "IP search" and select the DVR IP address to add device
Manually add IP address: Click "add device",then fill with IP address,TCP port,user name, password
2.2.5 Device connection: double click the device name,then choose main stream or extra stream, see below picture
Picture 2.10 Connect device successfully
2.3.1 If this is the first time for you to visit it,pls read it
(1)Login XM Cloud http://xmeye.net
(2)User guide,see below picture.
(3)Click "Next", then search IP address, see below picture:
(4)Click "Next", see below picture
(5)Click "Next", see below picture.
(6)Click "Next", enter to user registration page, see below picture.
(7)Click "Next", it's shown device serial number and another name,see below picture.
(8)Click "Next", it's shown registration finished page, see below picture.
(9)Click "Finish", see below picture.
2.3.2 Login by User, device manage(you can manage multiple devices if login by user).
(1)Login http://xmeye.net , click "By User", input user name and password
(2)After login, click "Device manage" -> "Add device",see below picture
(3)Enter "My device", double click device name, then you can monitor the device,see below picture
2.3.3 Login by device and device manage
(1)Go to http://xmeye.net ,click "By Device", fill with serial number and verify number.
(2)Ento into monitor live, see below picture
2.4.1 Login HVR
2.4.2 GotoMainMenu->System->DigitalManage->ChannelType, see below picture
Select different HVR mode, picture 3.1 shows "4ch analog D1 + 1ch 1080p IP + 7ch 720p IP".
Picture 3.1 ChannelType
If you connect a IP device, resolution or encode range is higher than HVR mode distribute, it will show nothing on screen, see below picture
Picture 3.2 IP device resolution higher than HVR mode
2.4.3 MainMenu->System->DigitalManage->DigitalChannels, click left corner button to add device ---- manual add and search IP address.
(1)Add IP camera to HVR, pls refer to client software user manual, see below picture:
Picture 3.3 Add device
Device name: HVR channel name
Device type: Optional, IP Camera or DVR
Protocol: default TCP
Remote channel: remote DVR channel number, if IP camera, choose 1
Stream: choose "main stream" or "extra stream" for remote channels
IP address: remote DVR/IP camera ip address, manual add or search IP
Port: DVR/IP camera TCP port
User name and passw...
chromas