01717.pdf

(49 KB) Pobierz
2500 SX/33
(250-1623)
Layout
Faxback Doc. # 1717
Mouse Connector─┐
Parallel Port
┌─Serial
Port
Keyboard Connector─┐
│
│
│
┌─Volume
Control
Monitor Connector─┐
│
│
│
│
│
┌─Headphone
┌───────────────┬───┬─┬─┬─┬─┬───────┬──────────┬─┬────┬───┬─┬─┬─┬──────────┐
│
└───┘ └─┘ └─┘
└──────────┘ └────┘
└─┘ └─┘
│
│
Video Enable/
┌─┐
SIMM
│
│
Disable
°E3
│ │<──
Riser Card
Sockets
───┐
│
│
Jumper
────────>°E2
│ │
│
│
│
°E1
│ │
┌─┬─┐ │
│
│ │
Math Coprocessor
│ │ │ │
│ ┌───────┐<──
Video Memory
│ │
Socket
───┐
│ │ │ │
│ ├───────┤
Upgrade
│ │
│
│ │ │ │
│ └───────┘<──
Sockets
│ │
┌─────────┐
│ │ │ │
│
├─┤
│
│
│ │ │ │
│
│ │
│
│
│ │ │ │
│
┌───┐
│ │
│
│
│ │ │ │
│
│
│<──
CMOS RAM
│ │
└─────────┘
└─┴─┘ │
│
└───┘
Battery
│ │ ┌──────────────┐ ┌───────────┐
│
│
└─┘ └──────────────┘ └───────────┘
│
└──────────────────────────────────────────────┼──────────┼────────────────┘
IDE Connector─┘
└─Floppy
Connector
°° = Indicates the relative jumper location - it does not indicate the
number of jumper positions.
Jumper Settings:
The main logic board of your computer has a Video Enable/Disable Jumper
Block consisting of three jumper pins labeled E1, E2, and E3. By default, a
jumper connects Pins E1 and E2 to enable VGA-compatible video. If you
install a video expansion adapter, you must disable the on-board video by
placing the jumper on Pins E2 and E3.
The following table summarizes the settings for the Video Enable/Disable
Jumper:
┌───────────────────────────────┬─────────────────────────┐
│Setting
of Video
│
Status of On-Board
│
│Enable/Disable
Jumper
│
VGA-Compatible Video
│
├───────────────────────────────┼─────────────────────────┤
│E1-E2*
│
Enabled
│
│E2-E3
│
Disabled
│
├───────────────────────────────┴─────────────────────────┤
│*
Indicates factory (default) setting.
│
└─────────────────────────────────────────────────────────┘

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin