Tool3.pdf

(4646 KB) Pobierz
Engine
Description
EXTRACTOR, VALVE GUIDE
Valve guide extractor used on Perkins engine
Part Number
07-00046-00
ADAPTER (PERKINS ENGINE)
Adapter for pulling liners on Perkins engines.
07-00054-00
TESTER, INJECT NOZZLE
Injector nozzle tester kit used for checking and
adjusting of the fuel Injectors in diesel engines.
07-00140-00
TESTER INJECT NOZZLE REPLACEMENT
BOWL (ACCESSORY FOR 07-00140-00)
07-00140-10
ADAPTER INJECTOR LINE (ACCESSORY FOR
07-00140-00)
Adapter line for tester inject nozzle. Accessory for
tester inject nozzle. (P/N 07-00140-00)
07-00036-00
3--1
Engine
Description
COMPRESSION TESTER KIT (DIESEL
ENGINES 150-850PSI)
This tool is used to check engine compression on
various diesel engines. it comes with the
compression tester, a handle, a high pressure
tester hose assembly, a fitting to go from the
injector adapter to the high pressure tester hose,
replacement cards, and an instruction CD.
Note: The following accessories/adapters
(07--50005--02 & 07--00179--02 through --10) are
used with this item.
CHART HOLDER - ORANGE PLASTIC
-
(Accessory for 07-00179-01 compression
tester)
This holds the compression charts on the
compression tester 07-00179-01.
ADAPTER, PERKINS 4-108 (Accessory for
07-00179-01 compression tester)
Part Number
07-00179-01
07-50005-00
07-00179-02
ADAPTER, MERCEDES 0M636 (Accessory for
07-00179-01 compression tester)
07-00179-03
CHARTS, 10-40 BAR (Accessory for
07-00179-01 compression tester)
07-00179-04
ADAPTER, KUBOTA 10mm Glow Plug
(Accessory for 07-00179-01 compression
tester)
07-00179-05
3--2
Description
ADAPTER, KUBOTA CT4-114 ENGINE
(Accessory for 07-00179-01 compression
tester)
Engine
Part Number
07-00179-06
CHARTS, 150-850PSI (Accessory for
07-00179-01 compression tester)
07-00179-07
HOSE, REPLACEMENT HOSE ASSEMBLY
(Accessory for 07-00179-01 compression
tester)
ADAPTER, INJECTOR TO TESTER HOSE
(Accessory for 07-00179-01 compression
tester)
07-00179-08
07-00179-09
ADAPTER, COMPRESSION TESTER
8mm Glow Plug (Accessory for 07-00179-01
compression tester)
TIMING TOOL
Balance gear timing tool for use on Kohler K301S
gasoline engines.
07-00179-10
07-00205-00
3--3
Engine
Description
SOCKET, INJECTOR
Socket for injector removal for Kubota IDI
engines.
Part Number
07-00224-00
SLEEVE INSTALLER, PERKINS FRONT
PULLEY
Sleeve Installer used to correctly install wear
sleeve on Perkins front pulley.
FRONT SEAL INSTALL TOOL, USED ON 4
CYL. KUBOTA
Seal installation tool used to install front seal on
Kubota 4 cylinder engines.
07-00227-00
07-00239-00
PULLER, INJECTOR
Injector puller for Kubota DI injection engines with
pencil style injectors.
PULLER, INJECTOR (LOW E ONLY)
Injector puller used on the low ”e” engine where the
injectors have a larger diameter and different con-
figuration.
CARBON RING INSTALLATION TOOL
KUBOTA DI
This tool is to aid in the installation of the carbon
ring seal in pencil type DI injectors.
07-00249-00
07-
-00458-
-00
07-00250-00
3--4
Description
SOCKET, WATER TEMPERATURE SENDER
(ADVANCE MICRO UNITS)
Socket used to remove the Water Temperature
Sender on Advance Units. 3/4” slotted, deep well
socket. Must purchase locally or from Snap--on
dealer. Snap--on part number: S6155.
Part Number
Purchase from
Snap--On
Engine
WRENCH, DAVCO FILTER
Used to remove and install the Davco fuel filter
07-
-00423-
-00
METER, COOLANT REFRACTOMETER
Used for testing integrity of glycol and features an
illuminated refractometer. (USES: EG = ethylene
glycol, PG = propylene glycol)
07-
-00435-
-00
3--5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin