FOFUS02GBB.PDF

(29 KB) Pobierz
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS
www.cobra.it
REV. 00
PETROL
DIESEL
X
MAKE
ALARM/SIREN
POSITION
FORD
MOD.
FUSION
YEAR
02
→
Position the compact alarms and the sirens behind the driver’s side headlamp.
Pass the cables through the rubber sleeve located on the bulkhead that divides
the engine compartment and the passenger’s compartment, on the left of the
servobrake.
Position the modular systems and the modules under the driver’s side dashboard.
+30:
connect to the positive that supplies the fuse box.
- 31:
connect to an original ground terminal located on the left, under the driver’s
side dashboard.
+15/54:
connect to the WHITE/GREEN wire at the position nr.1, in the black
connector, above the brake pedal.
Connect to the BLUE wire, at the position nr. 7, and to the BLUE/RED wire, at the
position nr.6, in the light blue connector, in the central under the steering column,
driver’s side
Positive control signal
Front window, driver’s side:
cut the WHITE wire in the 7 way black connector, in the original push buttons
panel.
Front window, passenger’s side:
cut the WHITE/VIOLET wire located in the wiring harness coming out of the
driver’s side door.
Positive control signal
Connect to the BLACK/RED wire at the position nr.9 in the green connector (lock)
and to the BLACK/GREEN wire at the position nr. 12 in the dark grey connector
(unlock). These connections must be done in the wiring harness coming out of the
central placed on the left, under the steering column.
Inertial switch
Cut the GREEN/ORANGE wire directly in the wiring harness coming out from the
inertial switch, behind the passenger’s side glove compartment.
+50:
Cut the GREY/BLACK wire at the position nr.7, in the 7 way black connector,
in the ignition key.
Install an additional switch on the headlamp support plate, driver’s side.
Connect to the BLACK/BLUE wire, at the position nr.3, in the dark grey connector,
in the central under the driver’s side steering column.
CENTRAL UNIT POSITION
POWER SUPPLY
IGNITION WIRE
DIRECTION INDICATORS
ELECTRIC WINDOWS
CENTRAL DOORS LOCKING
IMMOBILISATION POINT
STARTER
BONNET SWITCH
DOORS AND BOOT
SWITCHES
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fofus02gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin